Why customers rave about our casting products

When we cast casting products, we will consider that the wall thickness of the casting should be as uniform as possible, the transition of sections of different sizes should be reasonable, the walls should not be connected at sharp angles, the rounded corners of the castings should not have sharp corners, and the minimum casting aperture should be reasonable. The structure should be as simple as possible, have a reasonable draft angle, and reduce the parting surface and core. The thickness and distribution of stiffeners should be reasonable, and lugs, bosses, cantilever brackets and other castings with protruding parts should be designed to allow free removal of the mold from the mold.

When welding, the weld seam should be easy to operate, which is beneficial to reducing welding stress and deformation. The maximum stress should be avoided, and the stress should be concentrated on the processed surface. When welding, only by selecting the form, position and size of the welding joint to meet the corresponding requirements can we ensure the quality of the welding. When performing heat treatment, we will first check whether there are sharp corners, sharp changes and closed holes in the product. For large and long parts, the convenience of heat treatment, clamping and hanging should be considered when designing. During cutting, the parts should have reasonable process standards and surfaces with mutual position requirements. We will complete the processing in one clamping. The process standards and design standards of the parts we process are consistent. During assembly and maintenance, we will consider the processability of the thread and the reliability of the seal. When performing pressure processing, it is divided into forging parts, blanking parts, bent parts, deep drawing parts, fine blanking parts, and cold extrusion parts.The picture below is a picture of some casting products we make.

We make every item with care and attention, and choosing us is the most correct decision.